Tuesday, June 11, 2013

#1 Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End Reviews


Buy Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End Today.


  • Made of bronze for higher strength and corrosion resistance than brass
  • Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use
  • 200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP)
  • Solder end connections on both ends for a semi-permanent connection to a piping system
  • Top-mounted iron hand wheel for lowering and lifting the gate

Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End Reviews:


Buy Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End today at best price. Have you read customer review about this Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End? You should read our reviews, features and description about Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End to help you make a decision today.


Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3" Solder End


oplink/B006QPZPZS/clink opimg/41lzuIgYuxL.jpgclimg
clref


This class 125 Apollo Valve 102S series bronze gate valve has a non-rising stem and solder end connections on both ends. The bronze body, solid wedge gate, and screw-in bonnet provide higher strength and resistance to corrosion than brass. This valve has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve’s stem from leaking. This gate valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP), and it has a temperature range of -20 degrees F to 406 degrees F. It has solder end connections on both ends for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wh


oplink/B006QPZPZS/clinkApollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, 3clref




Apollo 102S Series Bronze Reviews
,

9 out of 10 based on 96 ratings







No comments:

Post a Comment